Environmental Testing
It is the measurement of the performance of equipment under specified environmental conditions, such as:
- extremely high and low temperatures
- large, swift variations in temperature
- blown and settling sand and dust
- very high or low humidity
- wet environments, waterproofness, icing
- vibrations (airborne and structural)
- power input variations
REACT Compliance & Testing Laboratories has the facilities to test for the below environmental tests:
- Shock and vibration testing
- Temperature testing
-Cold (Low Temperature) as per IEC 60068-2-1:2007, IS 9000 (Part 2/Sec 1 to 4):1977 (RA2016), QM 333 Issue-2:2010 Test No.:1, JSS 55555:2000 Revision 2 Test 20:2016
-Dry Heat (High Temperature) as per IEC 60068-2-2:2007, IS 9000 (Part 3/Sec 1 to 5):1977 (RA2016), QM 333 Issue-2:2010 Test No.:2, JSS 55555:2000 Revision 2 Test 17:2016
- Humidity testing
-Damp Heat steady state as per IEC 60068-2-78:2001, IS 9000 (Part 4):2008(RA2018), QM 333 Issue-2:2010 Test No.:5, JSS 55555:2000 Revision 2 Test 10: 2016
-Damp heat cyclic as per IEC 60068-2-30:2001, IS 9000 (Part 5/Sec 1&2) – 1981 (RA2016), QM 333 Issue-2:2010Test No.: 3, JSS 55555:2000 Revision 2 Test 27:2016
- Thermal shocks
- Temperature cycling test as per IEC 60068-2-14:2009 CL.4,5,6,7,8, IS 9000(Part 14/Sec 1 to 3):1988 (RA2018), QM 333 Issue-2:2010 Test No.4, JSS 55555:2000 Revision 2 Test 22:2016
Ingress Protection Testing
- Ingress protection or IP rating is the degree of protection offered by an electrical enclosure, against the entry of solids and liquids.
- If a liquid or solid particle enters electrical equipment it may not only be harmful to the equipment, but it may also be dangerous to the operator.
- REACT Compliance & Testing Laboratories is equipped to support testing as per IEC 60529 and IEC 60950-22 for up to the rating of IP67.
Accurate Product Testing by Experts
